Generic ETCS Driver’s Handbook
Acknowledging the lack of a harmonised manual for the use of ETCS, the European Union Agency for Railways (ERA) developed a generic ETCS driver’s Handbook to address the needs of the users.
The ETCS driver’s Handbook concerns Baseline 3 On-board Units (OBUs), i.e. those applying sets of specifications #2 and #3 of CCS TSI 2016 (Reg. 2016/919) Annex A (2.3.0d OBUs are not in scope as the Driver Machine Interface is not harmonised under set of specifications #1).
The Handbook covers both Baseline 3 software versions (SRS 3.4.0 and SRS 3.6.0), all possible system versions X.Y, all operating levels, modes, OBU options and screen technologies. It also considers the harmonised rules and other modalities defined in OPE TSI 2019 (Reg. 2019/773) and in particular Appendices A and C thereof.
It is provided in open-source MS Word and HTML versions, in English, French and German.
This Handbook is meant to serve the following uses (indicative list):
When using the MS Word version of the Handbook for a specific rolling-stock type fitted with a specific ETCS OBU, it is advisable to customise it so that only information relevant to that specific configuration is provided to the user. Such customisation can be carried out by applying the instructions contained in the Customisation Guide.
Users can also complement the Handbook with additional information concerning the specific rolling stock on which the OBU is installed, potential Class B system instructions or applicable company rules. Advice on how to do so while respecting the overall coherence of the Handbook is also included in the Customisation Guide.
An HTML Guide is equally provided explaining how to download, configure and use the HTML version in a digital medium (e.g. a tablet). This version may either be configured by the end users themselves or be customised before being handed over to them; both options are equally covered in the Guide.
It is underlined that the Handbook contains no new specifications compared to the referenced CCS TSI and OPE TSI; it only extracts out of the existing specifications those parts that are relevant to the driver and present them to him/her in a concise and user-friendly manner.
The generic ETCS driver’s Handbook has been compiled by INECO SA under a contract with ERA, with guidance from the operational experts of the ERTMS Operational Harmonisation (OH) workgroup of ERA.
Although every effort has been made to eliminate all errors, some may still persist. Users are prompted to report to ERA such occurrences or other suggestions for improvement.
A new version of the generic ETCS Driver’s Handbook is currently being elaborated in cooperation with Transurb SA. This version will, among other:
Once validated, this new version will again be made available for free download from this webpage, in both MS Word and HTML formats and in three languages (English, French, German), along with its customisation and user guides. This is expected by the end of Q1 2025. The current version of the Handbook will continue to be available for OBUs built according to Baseline 3 specifications.